De WallPro Single voldoet aan de volgende richtlijnen:
- Machinerichtlijn 2006/42 EC
- EMC 2014/30 EU
- LVD 2014/35 EU
- ErP richtlijn 2009/125 EC
- W3
Combining the best of both worlds, the WallPro 2.0 Single arms mounted externally is a self-cleaning welding fume extraction system with a large filter (20 m2) and a compact housing. The WallPro 2.0 Single arms mounted externally is designed for the extraction of the most demanding welding applications (e.q welding stainless steel) with very heavy smoke production, and complies with the W3 standard ✔.
This welding fume extractor comes in 3 variations: Standard, Power, and PowerPlus.
All arms can be mounted directly onto the filter unit, but also externally for extended reach. To facilitate maintenance, an optional dustbin extension can be connected. This allows you to provide safety for everyone: the welder, their immediate surroundings, as well as your maintenance technicians.
A large filter surface area with a cleaning system, yet a compact unit!
The WallPro 2.0 Single arms mounted externally utilizes Plymovent's new and unparalleled, fully automatic HyperClean™ filter cleaning system, setting a new standard for efficiency and performance in filter cleaning. Unlike the Back Pulse system, the HyperClean™ system requires a built-in compressed air tank, allowing the housing to remain compact.
This system has been specifically developed to clean the filter cartridge evenly and thoroughly, reducing filter load and extending its lifespan. The HyperClean™ system cleans the filter cartridge uniformly by blowing compressed air through flexible air lines. The tubes can move freely in all directions while expelling air jet at high velocity through the filter media, blowing the dirt from the filter surface area. The dust and dirt particles are collected in the dust bin.
The high-efficiency 20 m2 PTFE membrane filter cartridge ensures captured premium filter efficiency at low pressure drop. Equipped with a PTFE coating, the filter cartridge better repels dust during cleaning cycles. This extends the filter's lifespan and regulates any pressure drops, thereby reducing energy consumption.
Depending on the specific product type, WallPro 2.0 Single arms mounted externally is equipped with 2 types of control systems:
To comply with local laws and regulations, the WallPro 2.0 Single arms mounted externally can be fitted with an additional HEPA filter module (filter classification H14). This filter module is a universal, wall-mounted unit with a HEPA filter cassette and is suitable for duct mounting.
This filter unit is suitable for welding fumes originating from applications involving welding with steel and stainless steel. The WallPro 2.0 Single arms mounted externally is compliant with welding fume class W3. In most countries, W3 is required to enable the recirculation of filtered welding fumes originating from stainless steel applications.
With the WallPro 2.0 Single arms mounted externally, dust-free maintenance is possible to minimize exposure during general maintenance activities. Thanks to the valve between the filter and the dust container, the dust container can be emptied during operation. The filter can be replaced dust-free using the bag-in/bag-out system. However, you don't have to worry much about this, as the intervals between maintenance are long.
Our experts will be pleased to help you find a solution for your unique situation!
De WallPro Single voldoet aan de volgende richtlijnen:
De oplossing voor elke professionele lasser
1
2,2 kW (1,5 HP)
20 m2
1000 m3/u
1450 m3/u
75 dB(A)
67 dB(A)
2
2,2 kW (1,5 HP)
20 m2
2 x 1000 m3/u
2 x 1450 m3/u
76 dB(A)
71 dB(A)
1
2,2 kW (1,5 HP)
20 m2
Niet van toepassing
1800 m3/u
76 dB(A)
71 dB(A)
Bekijk de volgende opties
MonoGo is een uitstekend startpunt voor bescherming tegen blootstelling aan lasrook. Deze oplossing wordt vaak gebruikt voor afzuiging tijdens incidenteel of licht laswerk. In overeenstemming met W3 ✔
Dit modulaire filtratiesysteem vermindert op efficiënte wijze de achtergrondconcentratie van olienevel in CNC-machines en tijdens andere metaalbewerkingsprocessen.
De MDB is een modulaire stofcollector, waarmee het mogelijk is het filtersysteem af te stemmen op de eisen van jouw industriële toepassing. Gemaakt voor gebruik met zware toepassingen.
Afzuiging op de toorts is een efficiënte manier om bij de bron lasrook af te zuigen. De MDB-2/HV is een heavy-duty afzuigsysteem voor lastoortsen.
De SFD is een filterunit voor wandmontage voor lasrookafzuigingssystemen. Wordt normaliter gebruikt voor lichte of onderhoudsgerichte toepassingen.
De SFS is een lasrookafzuiger voor wandmontage met een zelfreinigend filter. Hij is ontworpen voor middelzware drooglastoepassingen.
Dit modulaire filtratiesysteem vermindert op efficiënte wijze de achtergrondconcentratie van olienevel in CNC-machines en tijdens andere metaalbewerkingsprocessen.
DualGo is een vaste lasrookafzuiger met twee afzuigarmen, een extra krachtige ventilator en een groot filter. In overeenstemming met W3 ✔
De MF is een flexibel en uitbreidbaar mechanisch filter. Ontworpen om lasrook en ander droog stof af te zuigen. Wordt gebruikt voor lichte of onderhoudsgerichte toepassingen.
Neem nu contact op met onze specialisten en krijg antwoord op al je vragen over schone lucht.